A special agitator shaft with symmetrically arranged agitator pegs and sleeves of tungsten carbide for wear protection devel- Vertical, batch operation mill for the preparation of tungsten Ideal flow behaviour due to a special agitator peg arrange-ment and the hemispherically shaped chamber floor integrated screen plate for grinding media separationIntensive cooling through a double-wall grinding tank and cooled circulation pipeline
Product inlet via rotor / immersion tube system prevents back flow of grinding media into the feed line.
Generally, there are two ways to obtain nano-powders. A bottom-up manufacturing method (bottom up) for chemical methods, such as chemical precipitation, sol-gel process (sol-gel),... Another method is physical method, which changes the powder particles from big to small (top down), such as mechanical ball milling,... And so on.
The Development In 1963, the first vertical agitator was developed internationally, the first horizontal agitator was developed in 1975, the first horizontal agitator bead mill with eccentric disks was introduced to the public and the horizontal disc grinder was introduced, in 2004, which became the industry standard. In the following years, the grinding media separation systems, the geometry of the grinding disks and the various grinding chamber materials were further developed.
The grinding system pin nanomill shows the evolutionary develop- ment of system with the rotor-slotted pipe separating system. The enclosed horizontal agitator mill is designed for highest product throughput rates and possesses a pin grinding system for highest grinding intensity.
In 2011, we developed the first zirconia comminution chamber technology in China. It has no metal ion pollution and is used in batteries, pharmaceuticals, glazes, ink and food.
砂磨机的储存原则:确保下次启用时可以正常使用。
1.砂磨机若长期(超过三个月)不用,需要进行储存性保护。
2.断电,如有必要拆除动力电源。
3.密封液排出,排出机械密封储液罐内的润滑冷却液,特别是溶剂型,避免机械密封内密封圈长时间浸泡,影响密封和使用寿命。
4.打开研磨腔,将腔内研磨球排空,避免研磨球在腔内滞留时间太长而发生板结等现象。
5.调整皮带张紧度,使皮带处于放松状态。
6.排空冷却夹套内的冷却液。
7.用缠绕膜对整机进行防尘保护。
8.整机可以移除工作区,放入储存区。